If you need a new oil filter for your motor vehicle then it is worth consulting an oil filter cross reference in order to ensure that you get the correct filter for your needs. The primary reason for this is that you don’t want to pay hefty garage charges in order to ensure that they fit it with the correct filter; nearly everybody is fully capable of fitting their own oil filter whilst at home. So how do you know when your oil filter needs changing?
If your car is suffering from troubles then it is highly likely that you need an oil filter change. There are a number of signs that you can look out for in order to establish whether this is the best course of action for you. The first thing I always suggest is running through your current tank of gas, sometimes the problems cease the next time you fill up. The cause of your vehicle improperly running could therefore be down to the gas you used as opposed to the oil filter. These signs however do point to the fact that your oil filter may need changing:
- When you try to accelerate to high speeds and it feels as though the vehicle has been turned off. A blocked oil filter will normally let your car run perfectly well at speeds below 40 miles per hour.
- If your car feels as though it’s running out of gas when climbing up a steep hill or cutting out as you turn a corner this again could indicate that you have a blocked filter.
It is imperative that you change your car filter as soon as possible once problems start occurring or you will be risking both your vehicles health as well as your safety. Once you have consulted an oil filter cross reference and chosen the correct filter for your needs you now need to change it. Luckily it isn’t too difficult. You have two courses of action here; take it a garage or attempt repair yourself. The latter option is of course the simplest. Changing the oil filter is a simple process of following these stages, although of course consult your car instruction manual to find out exactly how to do it as it does vary from model to model.
- Let the oil filter cool down and with a screwdriver remove it from its location. It is normally located around the carburetor area, although as mentioned before it is worth consulting your vehicles manufacturer in order to find out the actual location. You may experience fuel leakage so have a bucket handy to catch any excess.
- Put your new filter into the same place and make sure it is tight. The process is incredibly simple!
If you have established that you need a new oil filter then I suggest checking various websites online and find an oil filter cross reference. All you need to do is get the make and model of your car, ATV or other vehicle and check it on the oil filter cross reference chart. You will instantly be able to find out exactly what oil filter you need without all the expensive garage charges that are normally associated with them.